How to add brake fluid to your car in
Denver, CO
1. With the engine off raise the hood and
find the brake master cylinder.
2.
Usually located in the back of the engine on the right side.
Use caution and protect your car when opening a
container of brake fluid is toxic to you and your
car's paint.
3. Use a cloth to clean the
master cylinder's reservoir and cap to prevent dirt or water
from entering the reservoir. Clean the fluid lines if they need
it.
4. If your fluid is below the "MIN" line,
carefully pry off the cap, then add brake fluid until it is just under
"MAX". Be careful to not overfill the
reservoir.
5. Using a clean lint free cloth
clean the reservoir cap again, it needs to be
completely clean before you put it back on
6.
Carefully replace the cap and press down until it completely clicks into
place
7. Visit Lakewood Ford Service department to
have your brakes inspected, especially if your brake fluid
level continues to go down or if your fluid is dark in color. This could
mean you need your brake system serviced.