2017 Ford Shelby GT350 Alignment

Common signs include uneven tire wear, the GT350 pulling left or right, an off-center steering wheel, and vibration at speed.

If your 2017 Ford Shelby GT350 starts drifting on straight roads around Lakewood or shows feathered tire edges, alignment may be out of spec. High-performance suspensions are sensitive to potholes and curb impacts common across the Denver metro. Our Ford-certified techs verify alignment angles before recommending adjustments.

• Uneven or rapid inner/outer shoulder wear on performance tires
• Steering wheel not centered while driving straight
• Vehicle pulls or wanders after hitting a pothole or expansion joint

A GT350 alignment includes caster, camber, and toe measurement and adjustment to factory specs with a printed before/after report.

We begin with a suspension and steering inspection, verify tire pressures, and mount OEM-calibrated targets for precise readings. After adjustments, you receive a printout that documents the final settings for your records. Book a slot online and check offers any time.

• Suspension/steering inspection and tire pressure check
• Front and rear caster/camber/toe set to factory specification
• Printed before/after alignment readings and road test

If tie rods, ball joints, control arm bushings, or struts are worn, the alignment won’t hold and parts should be replaced first.

Symptoms like clunks over bumps, excessive play in the steering wheel, or rapid tire wear after a recent alignment point to underlying component wear. Our team inspects these items before adjusting angles to ensure the settings remain stable.

• Free play or noise indicates potential joint/bushing wear
• Uneven tire wear returning soon after a prior alignment
• Visual damage from potholes, curbs, or track use

Yes—when tires show uneven wear or after suspension work; if wear is even and it tracks straight, you may not need one immediately.

A performance coupe like the GT350 benefits from confirmed specs, especially after new tires, springs, or control arms. If the wheel is centered and wear is even, we can measure first and adjust only if out of range.

• Measure before adjusting to avoid unnecessary changes
• Always align after replacing steering/suspension parts
• Protects high-performance tires from premature wear

Every 2–3 years or about 30,000 miles is typical, and sooner after pothole impacts or suspension changes.

Front-range roads, construction zones, and winter freeze–thaw cycles can nudge alignment out of spec. If you drive canyon routes or hit a major pothole, schedule a check. Consistent intervals help the GT350 maintain crisp turn-in and even tire wear.

• Align after tire, strut/shock, or control-arm replacement
• Check sooner if the steering wheel goes off-center
• Monitor tires for shoulder feathering between services

Yes—our Lakewood, CO service center performs four-wheel alignments on the 2017 Ford Shelby GT350 with OEM-calibrated equipment.

We service performance Fords across the Denver metro and provide before/after printouts so you can verify results. Use our online tools to plan your visit and review current offers.

• Schedule service for your GT350
• Check service specials before you book
• Factory-trained Ford technicians and OEM procedures

Your 2017 Ford Shelby GT350 receives a thorough inspection and precise measurements before any adjustments. We start with a suspension and steering check for play or damage, set tire pressures to spec, then mount OEM-calibrated targets. Next, we measure caster, camber, and toe at all four corners and adjust to factory tolerances appropriate for a high-revving, track-capable coupe. Youll receive a printed before/after report that documents angles and verifies results, followed by a confirming road test around Lakewood. Review current service specials, then schedule service to lock in your preferred time.

The 2017 Ford Shelby GT350 uses factory caster, camber, and toe specifications that balance precise turn-in with tire longevity. We reference Fords service data and set front and rear angles independently, ensuring straight-line stability and predictable cornering. OEM alignment equipment and updated targets help capture the GT350s low ride-height geometry accurately. If recent potholes, curb strikes, or spirited canyon drives have nudged settings out of range, a verification and adjustment restores confidence. Bring your 2017 Ford Shelby GT350 to Larry H. Miller Ford Lakewood in Lakewood for a factory-spec alignment schedule service.

We proudly serve Lakewood, Denver, Littleton, Golden, Arvada, Aurora, and Westminster with alignment services tailored to Front Range driving. Freezethaw cycles, construction zones, and canyon roads can shift suspension angles and accelerate tire wear on a performance coupe like the GT350. Our team measures first, explains findings, and adjusts to Ford specifications so you leave with a centered wheel and verified results. Visit us at 11595 West 6th Avenue, Lakewood, CO 80215, review service specials, and schedule your alignment online for a convenient drop-off.