2017 Ford Explorer Alignment

Plan a four-wheel alignment every 2–3 years or about every 30,000 miles, and any time after suspension work or a major pothole impact.

Front Range roads and seasonal construction around Lakewood and Denver can nudge your 2017 Ford Explorer out of spec over time. Keeping caster, camber, and toe within factory ranges helps prevent premature tire wear and wandering. If you’ve recently replaced tires, struts, or tie-rod ends, align immediately to lock in even wear and proper handling.

• Recheck sooner after curb or pothole strikes
• Align after installing new tires or steering/suspension parts
• Use our online schedule service tool for convenient bookings

Uneven tire wear is the clearest sign your 2017 Ford Explorer needs an alignment.

Other symptoms include the vehicle pulling left or right on Lakewood’s straight roads, an off-center steering wheel while driving straight, or a steering wheel that doesn’t return smoothly after turns. Addressing these early protects your tires and restores confident highway tracking between Lakewood and Denver.

• Feathered or cupped tread blocks
• Vehicle drifts on flat roads; frequent steering corrections
• Steering wheel off-center when driving straight

A proper 2017 Ford Explorer alignment includes measuring and adjusting caster, camber, and toe to factory specifications with a printed before/after report.

Our team also checks tire pressures and inspects steering and suspension components to ensure settings will hold. This OEM-focused process gives your Explorer straight-line stability and even tread wear for everyday driving and mountain trips alike. You’ll leave with documented readings for your records.

• Suspension/steering inspection and tire pressure check
• Front and rear caster/camber/toe measurement and adjustment
• Printed alignment readings before and after service

Worn tie rods, ball joints, or struts mean you need suspension repair before an alignment will hold.

If your 2017 Ford Explorer repeatedly drifts soon after alignment, or if you hear clunks over bumps, underlying wear is likely. Our inspection identifies any loose components so we can correct them first, then set angles to Ford specs for lasting results. That saves tires and avoids repeat visits.

• Play in tie-rod ends or control arm bushings
• Leaking or weak struts/shocks affecting camber
• Bent wheels or damaged subframe from impacts

If it tracks straight with even tread wear, you can wait until the 2–3 year/30,000-mile interval or after any suspension or tire work.

Scheduling preemptively every tire rotation isn’t necessary for most Lakewood drivers. Instead, monitor wear and steering feel on your 2017 Ford Explorer and book service when symptoms appear or parts are replaced. This approach balances cost and tire longevity without over-servicing.

• Check tires monthly for inside/outside edge wear
• Align after new tires or steering/suspension repairs
• Use our schedule appointment tool to pick a time

Book online and bring your 2017 Ford Explorer to 11595 West 6th Avenue, Lakewood, CO 80215 for OEM-spec alignment service.

Our Lakewood location serves Denver, Littleton, Golden, Arvada, Aurora, and Westminster with Ford-certified care and documented before/after readings. Reserve your spot, then check current service specials to see if an alignment offer is available for your visit.

• Easy online scheduling
• Factory-trained Ford technicians and OEM procedures
• Printed alignment report for your records

The 2017 Ford Explorer uses independent front and rear suspension, so both axles require precise caster, camber, and toe settings to meet Ford’s factory tolerances. Our OEM-capable alignment systems reference Explorer-specific targets and compensate for vehicle ride height and load. We begin with a steering and suspension inspection, then measure all angles and adjust to spec on both ends to restore straight-line tracking and even wear. This is especially important before highway trips or towing up to 5,000 pounds within the Explorer’s capability. Bring your 2017 Ford Explorer to Larry H. Miller Ford Lakewood in Lakewood for a factory-spec alignment — schedule service.

Your visit starts with a road-ready check of tire pressures plus a visual inspection of steering and suspension components such as tie-rod ends, control arms, and struts. Next, we mount targets and measure front and rear caster, camber, and toe. Our technicians adjust angles to Ford factory specifications to stabilize steering feel and protect tire life, then provide a printed before/after report so you can see the improvements. A final road test confirms centered steering and straight tracking. Ready to lock in OEM geometry on your 2017 Ford Explorer? Schedule service online; check service specials before you arrive.

We align the 2017 Ford Explorer for real Colorado driving—urban commutes, I‑70 journeys, and neighborhood routes across Lakewood, Denver, Littleton, Golden, Arvada, Aurora, and Westminster. Freeze-thaw cycles, potholes, and ongoing roadwork around the Denver metro can nudge alignment out of spec, making periodic checks a smart habit. Our Lakewood facility uses Ford-approved procedures to measure and set all angles, then documents results so you leave confident in your SUV’s handling. For directions, hours, or to reserve your time, visit our online scheduler or call our team. We’re ready to restore your Explorer’s straight-line stability and even tire wear with a precise, OEM-focused alignment.