2010 Ford F-150 Oil Change in Lakewood, CO

Larry H. Miller Ford Lakewood provides up-front, VIN-based pricing for a 2010 Ford F-150 oil change.

Final cost depends on the exact engine calibration, oil type, and filter specification for your truck. Use our online tools or call to receive an itemized estimate that reflects OEM-spec oil and a Ford-approved filter. Pricing transparency helps you compare options fairly and plan your visit.

• OEM-spec oil and Ford-approved filter included
• Itemized estimate before work begins
• Check our service specials for current offers

Service time is confirmed at check-in based on shop capacity and your 2010 Ford F-150’s requirements.

Appointment schedules vary by day and workload. Booking ahead helps us stage parts and a bay for your regular cab F-150 with the 4.6-liter V8. You’ll receive a time estimate when you arrive or when you schedule online.

• Appointment recommended to minimize wait
• Time estimate provided at drop-off
• Book online: schedule service

Follow the Ford maintenance schedule listed in your 2010 Ford F-150 owner’s manual.

Interval guidance varies with driving style and conditions around Lakewood and the Greater Denver area, including cold starts, dust, towing, and stop-and-go traffic. Severe-duty use typically requires more frequent changes. If you’re unsure which schedule applies, our team can review it with your VIN.

• Refer to the 2010 Ford F-150 owner’s manual
• Adjust for Denver winters, dust, and towing
• Get interval guidance during your appointment

Use oil that meets the Ford OEM specification listed for your 2010 Ford F-150 in the owner’s manual.

Oil requirements depend on the exact engine calibration of the 4.6-liter V8. We install oil that meets Ford’s specification and pair it with a Ford-approved filter to protect engine longevity. Bring your VIN and we’ll confirm the correct formulation at write-up.

• OEM-spec oil matched to your VIN
• Ford-approved oil filter installed
• Specification verified at scheduling or check-in

The exact oil capacity is verified by VIN for your 2010 Ford F-150 at service write-up.

Different engine calibrations and filters can change the fill quantity slightly. Our technicians drain, measure, and refill to spec, then verify the level after running the engine. This ensures proper lubrication without overfilling.

• Capacity confirmed using your VIN and engine code
• Level rechecked after engine run-up
• Disposal of used oil included

Yes—dealer service uses OEM-spec oil and a Ford-approved filter, plus a multi-point inspection.

Quick-lube shops can be convenient, but our Lakewood team documents service to OEM standards, which supports warranty compliance and long-term reliability. You also get access to Ford-trained technicians and current service specials.

• OEM-spec oil and Ford-approved filter
• Multi-point inspection and fluid top-offs
• Service records tied to your VIN

Missing required oil changes can jeopardize coverage if you can’t document service per Ford’s maintenance schedule.

Keep receipts and repair orders that show the correct oil spec and intervals for your 2010 Ford F-150. For any warranty-related work, manufacturers generally require documentation and repairs at a certified facility. We can help you maintain clear records.

• Save dated service records
• Use OEM-spec oil and filter
• Ask us to align service to your manual

Full synthetic delivers superior high-temperature stability and cold-start flow versus conventional; synthetic blends sit between the two.

The right choice depends on your 2010 Ford F-150’s OEM spec and Denver-area driving (cold mornings, dust, towing). We’ll match the oil to Ford’s specification for your 4.6-liter V8 and your usage profile to balance protection and cost.

• Full synthetic: best overall protection
• Synthetic blend: value and improved stability
• Conventional: basic protection when specified

Use our online scheduler at /service/service-appointment.htm to book your 2010 Ford F-150 oil change.

Choose a time that fits your day and we’ll confirm the appointment by email or phone. You can also review current service specials before you book. Directions: 11595 West 6th Avenue, Lakewood, CO 80215.

• Online schedule service
• View offers on our service specials page
• Convenient Denver metro location

We serve Lakewood, Denver, Littleton, Golden, Arvada, Aurora, and Westminster with OEM-spec oil service tailored to regional conditions. Cold Colorado mornings demand reliable cold-start pumpability, while summer heat, dust from unpaved roads, towing, and stop-and-go traffic can stress engine oil. Our advisors confirm the correct Ford specification for your 2010 Ford F-150’s 4.6-liter V8 at write-up, then coordinate parts and bay time to keep you on schedule. You can plan your visit and review current offers before you arrive.

Find us at 11595 West 6th Avenue, Lakewood, CO 80215. For convenience, you can schedule service online and check our service specials for potential savings. Clear communication, OEM procedures, and documentation help protect your truck over the long haul.

Your visit covers a complete drain and refill with oil that meets the Ford specification for your VIN, installation of a Ford-approved oil filter, and proper torque of the drain plug. Our team performs a multi-point inspection, tops off essential fluids, and checks tire pressures. Service documentation reflects the oil type and parts used, supporting maintenance compliance for your 2010 Ford F-150. If you have questions about recommended intervals or usage-based adjustments, we’ll walk you through the owner’s manual guidance during write-up.

See current offers on our service specials page, then schedule service at a time that fits your day. We’ll confirm details at check-in and keep you updated while your truck is in the bay.

The 2010 Ford F-150 Regular Cab shown here features a 4.6-liter V8 (engine code 8VNAG4.6), rear-wheel drive, and an automatic transmission. Oil specification, viscosity, and capacity depend on the exact engine calibration and filter; we verify these by VIN to ensure the correct fill and performance. Our technicians install oil that meets the Ford OEM spec for your truck and pair it with a Ford-approved filter, then confirm level after a run-up.

If your driving includes cold starts, dusty roads, towing, or frequent short trips in the Denver area, we can recommend an interval aligned to the severe-duty guidance in the owner’s manual. Bring your 2010 Ford F-150 to Larry H. Miller Ford Lakewood in Lakewood for an OEM-spec oil change — schedule service.